Interface Valve

Features
● 316 stainless steel construction
● Large Cv factor assures fast system response
Technical Data
● Body pressure rating(Control Ports): 10000psig
● Working temperature :-20°F(_29C)to 250°F(121°C)
Ports: 1/4＂FNPT

The IV series is a two position, three-way normally closed,Pilot Supply pressure operated, hydraulic flow control valve assembly. It is designed to establish high-pressure hydraulic fluid output, automatically with each application of relatively low Pilot Supply pressure.

A loss of Pilot Supply pressure will block the hydraulic Supply(inlet) port and exhaust the accumulated operating pressure within the high pressure receiving control circuit. Hydraulic Interfaces (Interface Valves) are generally used to control the open/close operating sequence of Surface Controlled Sub-Surface Safety Valves (SCSSV) or Surface Safety Valves(SSV).

Dimension

Specifications
6000PSI(42MPa)
10000PSI(69MPa)
20000PSI(138MPa)
Flow Control Application
Normally Open / Closed
Normally Closed
Normally Open / Closed
Control Function
2way
3way
2way
Operate Press.
6000PS1(42MPa)
10000PSI(69MPa)
20000PSI(138MPa)
Pilot Press.
150PSI
Work Temp.
-20°F(-29°C)to 250°F(121°C)
Wetted Component Material
316 SSand 17-4PHSS
Seal Material
Buna N and Peek
Valve Ports
1/4"FNPT
1/4"FNPT&MF4&HF4
Pilot Port
1/4"FNPT
Pilot Supply Operating Ratio
100:1 125:1
Orifice
6.9mm
3.2mm
3mm
Panel Hole Size
35mm
35mm
35mm
Ordering Information

IV10SS1FP4-31H
IV 10 SS FP4 3 1 H
IV-Interface Valve
06-6000psig SS-316 FP4-FNPT1/4 1-2Way,NC
1-100:1
H-With handie

10-10000psig
S4-304 MF4-1/4"M.P. 2-2Way,NO
2-125:1
None

20-20000psig

HF4-1/4"H.P.
3-2Way,NC

30-30000psig

*Please contact us for non-standard products.

About us

Customer services

Sell on waimao.163.com